Mastering Ansys CFD (Level 1)

  • 87
  • 0
  • 0
  • 0
wolves-头像
Mastering Ansys CFD (Level 1)
收藏
  • Mastering Ansys CFD (Level 1)-缩略图
  • 举报
  • 点赞
  • 0
  • 分享

素材介绍

h264, yuv420p, 1280×720 |ENGLISH, aac, 44100 Hz, 2 channels | 16h 32 mn | 10.17 GB

Created by: Sijal Ahmed



Become pro in computational fluid dynamics (CFD) from A to Z using Fluent, CFX, ICEMCFD and Ansys Workbench



What you’ll learn



How to understand problem and get important parameters.

Setup problem using different CFD tools such as Fluent, CFX, ICEMCFD, Design modeller, Ansys meshing etc

Comparison of experimental or analytical data or available high quality CFD data to your own CFD analysis

Should be able to solve any CFD problem from starting to final results.



Requirements



Basic understanding of fluid dynamics and CFD.

Ansys 18.1 installed on your computer.

Computer with 4 GB Ram and i3 processor is recommend.



Description



Complete CFD Course to teach you CFD from A-Z. Specially designed for students who have no prior knowledge of any CFD software. We will teach you from scratch and work through to understand all important commands and concepts to understand CFD and it application to sample problems.



What you will get in this course: 1. Complete guidance of using commercial CFD codes such as Fluent, CFX, ICEMCFD, Ansys Meshing, Designmodeler and Ansys Workbench.



2. How to define problem, create geometry, clean and prepare geometry, hexa and tetra mesh generation in ICEMCFD and Ansys Meshing, problem setup in CFX Pre or Fluent, problem solution in both CFX and Fluent solver, Post processing Fluent and CFD Post.



3. Teach you that how to check mesh independence in order to make the CFD results error free due to common mistakes during CFD simulation.



4. Enable you to compare results with experimental data to access the results accuracy and quality.



5. Finally we teach you that how to conclude the results and how to discuss results in accordance with physics of problem. Which is needed when you are writing your project report, thesis report or research paper for conference of journal.



6. New section on mixing of two fluids with extensive post processing is added on Feb 05, 2020. In this section I have used ANSYS 2019 R3 and made very extensive post processing including mesh independence. This problem is solved inside workbench completely.



What students are saying:



OVER 700+ AWESOME REVIEWS!!! Around 4000+ satisfied students from all over the world! The number 1 Best Selling ANSYS course on Udemy, by far.



Thelson Davidy : “The course is inspire me, I didn’t have nothing to teach me the basic of CFD. The explanations are amazing, in my opinion, the course permise me to have a big knowledge about ansys and how I can to find much solutions, when a body is in contact with a fluid.”



Niaz Khan : “Although, I already had the know-how of FLUENT, but still this course clear my concepts. Highly recommended for all.”



Swagat Sundar Kar : “This course is very much awesome for the beginners,everything is in detailed one,new learners should take this course.”



Önder Sönmez : Throughout the course, subjects were detailed and help to improve in the CFD field. I am pleased to enroll in this specific field course.



K. Sekhar Menon says :” He is an awesome instructor and his skills are helpful for beginners.”



Sujit Mishra says :” I found the course is very informative for the new beginners in the field of CFD. As a Ph.D. scholar in CFD field, I got passionate to be involved in new ideas and projects in Ansys CFD fluent. Frankly speaking, I am got a big fan of Mr.Sijal Ahmed sir who help out in my each and every doubt I got in the video.”



Saurabh Parga says :” Course is well structured and is a good starting point for understanding the user interface of Ansys-package.”



Suraj M S says: “The course starts with the most fundamental example for Computational Fluid Dynamics, which would help anyone to learn CFD without any prior knowledge .”



Simeon ILIEV (Dean at top european university) says: “Very good presentation. Very interesting themes. It is easy to understand. .”



Shkarah Ahmed says: “Best course on Ansys , افضل كورس في الانسس “



Shashank Dwivedi says: “Very comprehensive and detail explained topics “



Hamza Sultan says, “That is the best CFD course online. i haven’t found any MOOC like this on internet. And i hope instructor will put a mess study section also which i think is a general study. .”



Salient features:



12.5 hours on demand video content spread over 114 lectures



45+ supplemental resources including books, input/output files, solution files, ppt slides for all lectures and software links and instruction to install them.



Full life time access, anywhere & anytime.



Access on mobile, TV, desktop and laptop.



Only Bestseller CFD course with over 700+ ratings.



Around 4000 students enrolled from 150 countries around the world.



Total time taught is 10,000 hours.



Who this course is for:



Engineering and science students/professional who are using CFD for problem solving.

Undergrad, MS and PhD students who want to apply CFD in their research.

wolves-头像
  • 163
  • 10339808
  • Mastering Ansys CFD (Level 2)
    Mastering Ansys CFD (Level 2)
    • 133
    • 0
    • 0
    • 0
  • Mastering Ansys CFD (Level 1)
    Mastering Ansys CFD (Level 1)
    • 88
    • 0
    • 0
    • 0
  • Machine Learning A-Z: AI, Python & R + ChatGPT Bonus  2023
    Machine Learning A-Z: AI, Python & R + ChatGPT Bonus 2023
    • 709
    • 0
    • 1
    • 0

评论(0)

  • 热评
  • 所有评论
还没有评论哦~
还没有评论哦~

关键词

  • Mastering-Ansys-CFD
  • Ansys-CFD
  • Ansys-课程
  • Level-1
  • 近期更新
  • 热评推荐
  • 热门点击
Mastering Ansys CFD (Level 2)

Mastering Ansys CFD (Level 2)

2024-05-26 21:31:50

Mastering Ansys CFD (Level 1)

Mastering Ansys CFD (Level 1)

2024-05-26 21:24:33

Machine Learning A-Z: AI, Python & R + ChatGPT Bonus  2023

Machine Learning A-Z: AI, Python & R + ChatGPT Bonus 2023

2024-05-19 20:13:59

Reallusion-iClone头发生成插件预设 Hair Builder 1+2

Reallusion-iClone头发生成插件预设 Hair Builder 1+2

2024-04-28 12:05:50

ANSYS SYNMATRIX FILTER 2024R1 x64

ANSYS SYNMATRIX FILTER 2024R1 x64

2024-04-10 13:29:06

3DsMax建模插件集合:rapidTools v1.14+使用教程

3DsMax建模插件集合:rapidTools v1.14+使用教程

2020-07-06 17:44:38

Proko-人体解剖高级付费版(中文字幕)256课

Proko-人体解剖高级付费版(中文字幕)256课

2020-12-21 18:34:01

VitaliStore - All Design Bundle Papercraft Sculptures Design 动物纸模模型 纸模型雕塑设计

VitaliStore - All Design Bundle Papercraft Sculptures Design 动物纸模模型 纸模型雕塑设计

2020-07-21 17:18:14

小武拉莫日系摄影后期第二期中文视频教程

小武拉莫日系摄影后期第二期中文视频教程

2021-12-10 14:26:14

Mod Portfolio 3477506 画册模板 时尚杂志画册模版

Mod Portfolio 3477506 画册模板 时尚杂志画册模版

2020-07-13 10:43:06

小武拉莫日系摄影后期第二期中文视频教程

小武拉莫日系摄影后期第二期中文视频教程

2021-12-10 14:26:14

MasterClass 大师班课程84套合集+中文字幕+持续更新+赠品会员

MasterClass 大师班课程84套合集+中文字幕+持续更新+赠品会员

2021-01-26 16:03:27

日月星辰矢量图 星辰插画 星座矢量插画 宇宙空间矢量素材 Space set 3760063

日月星辰矢量图 星辰插画 星座矢量插画 宇宙空间矢量素材 Space set 3760063

2019-08-12 15:38:06

VitaliStore - All Design Bundle Papercraft Sculptures Design 动物纸模模型 纸模型雕塑设计

VitaliStore - All Design Bundle Papercraft Sculptures Design 动物纸模模型 纸模型雕塑设计

2020-07-21 17:18:14

加特林机枪模型 加特林机关枪 Minigun Hi-Poly

加特林机枪模型 加特林机关枪 Minigun Hi-Poly

2019-07-31 11:06:07

标签云

  • Mastering-Ansys-CFD
  • Ansys-CFD
  • Ansys-课程
  • Level-1

相关资源/猜你喜欢