Design the High Rise Buildings ( Level 2 )

Design the High Rise Buildings ( Level 2 )

Structural Engineering Software ( ETABS&SAFE ), from point of view of skyscrapers design engineer .

https://www.udemy.com/course/design-the-high-rise-buildings-level-2/

上次更新 4/2020

1 个章节 • 11 个讲座 • 总时长 2 小时 55 分钟

你将会学到的

In this course the engineers will learn how to use the technical software with required codes to achieve the optimal and safer design to the high rise buildings .

To be structural designer

This course is a continuation of Design The High Rise Buildings Series ( Level 1 ,2 and 3 )

要求

Not mandatory but preferable a Previous knowledge of ( ETABS&SAFE ) software and ACI & ASCE & UBC codes .

ETABS & SAFE ( Technically Knowledge ) and should be enrolled of the first level of our series which is *Design The High Rise Buildings Level ( 1 ) *

说明

In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :



Part 1 ( ETABS Model )



Check Load Combinations .



Check Static Seismic Forces AS Per UBC97.



Check Dynamic Seismic Forces AS Per UBC97.



Check P-Delta Analysis



Check the Mass Source.



Check The Time Period.



Check The Mode Shapes.



Check The Wind Tunnel .



Check The Base Shear As Per UBC97



Check Displacement Per Wind As Per ASCE7-16



Check The Overturning Moment.



Check Seismic Drift As Per UBC97



Design All Members Using ACI318M-14



Part 2 ( SAFE Model )



Check The Materials, Slabs thickness, Rebars and loads



Check Load Combinations As Per ACI318M-14



Draw the strips for designing .



Check Automatic Mesh.



Check the Stiff Areas.



Check The Deflection As Per ACI318M-14



Design The Slab AS Per ACI318M-14



Check The Punching AS Per ACI318M-14



At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.



此课程面向哪些人：

The course for the structural engineers who are aiming to be a designers.

Beginner & Experienced