Digital Electronics Robotics learn by building module II

Digital Electronics: Robotics, learn by building module II

Over 2,400 enrolled! Open doors to careers and hobbies and have fun while learning digital electronics!

What you'll learn

Design and construct digital electronic circuits, use micro-controllers to control real world items like robots you build!

You will be able to program micro-controllers like the PIC and Arduino.

Requirements

You will need knowledge of analog electronics and the parts listed in the first lesson.

No prior experience or knowledge in digital electronics is needed – just some basic math and computer skills!

Description

Building on the knowledge you gained in the Analog Electronics module opens even more doors to diverse careers and hobbies. Think about how many industries / businesses / hobbies that involve computers or computer control. Even automobiles are chock full of digital electronics now. All of this involves digital electronics, and you want in on it today. In this module 2 course, you will build digital electronic circuits, use and program micro-controllers like the PIC and Arduino, and connect to the real world with them. You’ll need a good understanding of basic electronics (i.e., you’ve completed the Robotics: Learn by building, module I), some basic math skills, a computer, and that’s it! No prior knowledge of digital electronics or programming is required, and yet by the end of this course you’ll have built functioning digital electronic circuits like a digital memory, and programmed micro-controllers which are basically a computer on a microchip. You will connect these to the real world for home automation and of course, controlling your robots.

*All courses have captions for the hearing impaired.

Course materials:

You will need the analog electronic parts and a breadboard, which you can purchase as an accompanying kit (i.e., the Analog Electronics Kit from module I) or provide your own.

You will also need the digital electronics kit which again you can purchase as an accompanying kit or provide your own parts. The first lesson is a walk-through of what is in the kit and acts as a parts list for this module.

This series of “Robotics: Learn by building” modules has an end-goal focus on the diverse field of robotics. In module I we learned the basics of electricity and electronics. In this module II you further develop your knowledge and skills to include digital electronics and practice your skills on real-life digital components.

This course is the prerequisite for the module III course where you’ll learn robotic drive systems and physics, and gain a wide variety of skills in prototyping so you can actually build your own robots and manufacture your own parts. In module IV, you’ll culminate all you’ve learned so far as you build a 3D printer from scratch, hook it up to a desktop computer and make your own plastic parts. The 3D printer is, in effect, a robot which you can then use to make parts for your other robot designs. In module V you can take your robot design and construction skills to the next level with a hands-on approach to autonomous robotic systems: learning about various sensors to know where you are and what your robot is doing, GPS navigation, basic artificial intelligence, powerful microchips known as FPGA’s where you literally design a custom circuit on the chip, vision systems and more.

Lesson overview:

In this course we’ll be covering:

What is digital?

Binary & Hexadecimal system and ASCII

Analog to digital and digital to analog conversion

Logic gates and you’ll make your own RAM

Digital Addressing/de-multiplexing

Microprocessors & micro-controllers – what are they?

Programming & using PIC micro-controllers to:

display information on an LCD display

Read both digital and analog inputs

PWM control a DC motor and servo motor

Read keypad matrixes

control LED displays

writing to flash memory on board for remote systems

What is Arduino?

Using Arduino for all of the PIC projects above, as well as using full-colour TFT touch screens Building our mobile robot Giving our mobile robot a “brain” Ultrasonics and ultrasonic radar / external sensing Programmable IR remote and more!

Who this course is for:

You have a desire to learn computer control and electronics, especially geared towards building and controlling robots.

You want to understand the heartbeat of computers and digital systems, and want to build your own digital electronic devices.